5.2.1.1
Function ground
• The function ground can be connected either at the ground screw or at the
terminal.
• The function ground should be connected with a cable as short as possible to
guarantee a good EMC property.
• Therefore is to prefer to connect the ground via the ground screw.
5.2.2
EtherNet/IP interface
EtherNet/IP is attached at the RJ-45 socket on the left housing side. The RJ-45
socket supports 10Base-T networks according to the IEEE 802.3.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Connections, Displays and Operating Keys
AS-i EtherNet/IP Gateway
Copyright Pepperl+Fuchs, Printed in Germany
15