Function Ground - Pepperl+Fuchs VBG-EN-K20-D Manual

5.1.1.1

Function ground

• The function ground can be connected either at the ground screw or at the
terminal.
• The function ground should be connected with a cable as short as possible to
guarantee a good EMC property.
• Therefore is to prefer to connect the ground via the ground screw.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Connections, Displays and Operating Keys
AS-i EtherNet/IP Gateway
Copyright Pepperl+Fuchs, Printed in Germany
13