Quick Setup - Pepperl+Fuchs VBG-EN-K20-D Manual

7.3

Quick setup

This menu enables a fast configuration of the AS-i network.
Warning: outputs may be reset!
Pressing "OK" you switch to the submenu "Store AS-i Configuration".
"Store+Run"
With "OK" you store the current AS-i network configuration and the attached sla-
ves as the target configuration. The gateway changes into the protected operating
mode.
"Store+Prj Mode"
With "OK" you store the current AS-i network configuration and the attached sla-
ves. The gateway remains in the project mode.
By pressing the "ESC" button you leave this menu and switch back to the main
menu.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
Operating in Advanced Display Mode
WA R N I N G :
O U T P U T M AY B E
R E S E T
S T O R E A S - I
C O N F I G U R AT I O N
S T O R E + R U N
S T O R E + P R J M O D E
AS-i EtherNet/IP Gateway
Copyright Pepperl+Fuchs, Printed in Germany
33