Disassembly For Cleaning; Folding Down The Slide; Removing The Knife Cover - Graef Concept Series Operating Manual

IMPORTANT!
The statements refer to single-shift operation.
The safety and product data sheets supplied with the cleaning and disinfection agents
have to be observed.

6.4 Disassembly for cleaning

6.4.1 Folding down the slide

- Completely close the stop plate.
- Using some drive, pull the slide against the spring pressure completely back and
dump it towards the right side in one movement.
IMPORTANT!
The slide can be dumped only if the cutting thickness adjustment has been turned clock-
wise to the end stop and the stop plate is thus completely closed.

6.4.2 Removing the knife cover

- Put on cut-resistant protective gloves.
- Turn the black handle of the blade cover upward.
- Loosen the blade cover at the top.
- Then pull the blade cover upwards and then remove it from the machine.
47