Cab Component Installation; Install The Smartrax Node; Mount The Smartrax Node - Raven SmarTrax Installation Manual

CHAPTER
5

Install the SmarTrax Node

Mount the SmarTrax Node

Note:
The orientation of the node mounting plate may vary, depending on the machine's harness and
hose routing.
Open the instructional seat.
1.
Node Harness Installed
FIGURE 1.
Position the node mounting bracket (P/N 107-0172-055) on the floor of the instructional seat compartment
2.
so that one of the arrows on the node casing will point straight ahead when the node is installed.
Secure the node mounting bracket to the floor using two #8 x 3/4" self-tapping screws (P/N 310-1002-070).
3.
Install the two large, rectangular node connectors of the node harness (P/N 115-4001-109) into the correct
4.
ports of the node.
Tighten the bolts on the harness connectors to secure the connections.
5.
Install the node (P/N 063-0173-228) on the node mounting bracket using three 3/8"-16 lock nuts (P/N 312-
6.
4001-109).
Manual No. 016-5032-023 Rev. A
C ab Component
C h a p t e r 5
Installation
29