Table of Contents
Advertisement
CHAPTER
4
INSTALL THE GPS RECEIVER CABLE
1. Locate and disconnect the existing cable connected to the GPS receiver.
FIGURE 1. GPS Receiver Adapter Cable Connection
2. Connect the mating connector on the Steer-Ready Roof Cable (P/N 115-4010-121) to the existing roof harness.
3. Connect the remaining rectangular connectors to the GPS receiver.
FIGURE 2. GPS Receiver Adapter Cable Installed
016-5032-107 Rev. A
C AB COMPONENT
C H A P T E R 4
INSTALLATION
11
Advertisement
Table of Contents
