Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Raven Manuals
  4. Farm Equipment
  5. SmarTrax
  6. Supplement installation manual

Raven SmarTrax Supplement Installation Manual

Nitro n2
Hide thumbs Also See for SmarTrax:

Advertisement

Quick Links

Download this manual
Nitro N2

Advertisement

loading
Need help?

Need help?

Do you have a question about the SmarTrax and is the answer not in the manual?

Questions and answers

Related Manuals for Raven SmarTrax

Summary of Contents for Raven SmarTrax

  • Page 1 Nitro N2...
  • Page 2 Raven Industries shall not be responsible or liable for incidental or consequential damages or a loss of anticipated benefits or profits, work stoppage or loss or impairment of data arising out of the use or inability to use the Smartrax or any of its components.
  • Page 3 Manual # 016-0190-069 H A P T E R NTRODUCTION Congratulations on your purchase of the Raven SmarTrax system! This system is designed to provide cutting-edge, hands-free steering of your machine via GPS coordinates.

  • Page 4: Basic Kit

    Nitro N2 SmarTrax Installation Manual Below you will see the kit contents that you should have received with this SmarTrax kit. Basic Kit Contents Nitro N2 SmarTrax Kit Contents Quantity Item Description Part Number SENSOR, ASSEMBLY, LINEAR STEERING 063-0181-001 POSITION WELDMENT, BRACKET, UNIVERSAL HYD., MTG.,...
  • Page 5 Caution must be exercised. Any work carried out on the hydraulic system must be performed in accordance with the machine manufacturerer’s approved maintenance instructions. Raven Industries recommends that appropri- ate protective equipment be worn when working on the hydraulic system. Ob- jects or materials that are able to bypass the machine’s hydraulic filtration system...
  • Page 6 Nitro N2 SmarTrax Installation Manual We welcome your feedback about this manual. If you have any comments or Contacting suggestions for improvement, please let us know by contacting our Customer Raven Support Center by any of the following methods: Industries...
  • Page 7 Mount the bracket with the supplied 4 bolts and 2 plates to clamp around the cross member. Mount the valve to the bracket. Attach the pressure switch to the PS port on SmarTrax valve. Refer to the Universal Kit manual for additional instructions on bracket assembly and valve mounting.
  • Page 8 Nitro N2 SmarTrax Installation Manual Notes:...
  • Page 9 Manual # 016-0190-069 H A P T E R YDRAULICS Label hoses L, R, P, T before removal. Orbital ports are labeled. Remove P, L, R hoses. Install the 11/16” ORFS run tee onto the L & R ports. Install the 13/16” ORFS run tee onto the P port.
  • Page 10 Attach hose (P/N 214-1000-452) to the L port on the orbital. Route the hose to the SmarTrax valve and attach to the A port using a 90° fitting if needed. Attach hose (P/N 214-1000-452) to the R port on the orbital.
  • Page 11 Manual # 016-0190-069 H A P T E R TEERING OSITION ENSOR & IRING ARNESS NSTALLATION Mounting the Mount the SPS to the steering cylinder on the right side of the machine. Steering Be sure, upon startup, to turn wheels slowly,. Do not over extend or over compress the sensor.
  • Page 12 Nitro N2 SmarTrax Installation Manual Wiring Connect wiring ends to the valve coil, pressure switch, and SPS. Installation Route into cab. Allow slack for wheel adjustment.

  • Page 13: Start-Up Procedures

    Manual # 016-0190-069 H A P T E R TART- ROCEDURES After installing the SmarTrax on your machine, always follow these start-up procedures. Make sure the Steering Position Sensor rotates freely when turning the wheels. Turn the wheels fully from side to side numerous times to remove air from the hydraulic system.
  • Page 14 Nitro N2 SmarTrax Installation Manual Notes:...
  • Page 15 RAVEN INDUSTRIES LIMITED WARRANTY WHAT IS COVERED? This warranty covers all defects in workmanship or materials in your Raven Flow Control Product under normal use, maintenance, and service. HOW LONG IS THE COVERAGE PERIOD? This warranty coverage runs for 12 months from the purchase date of your Raven Flow Control Product.
  • Page 16 P.O. Box 5107 www.ravenprecision.com Sioux Falls, SD 57117-5107 fcdinfo@ravenind.com Notice: This document and the information provided are the property of Raven Industries, Inc. and may only be used as authorized by Raven Industries, Inc. All rights reserved under the copyright laws.