Cab Component Installation; Install The Smartrax Node; Mount The Smartrax Node - Raven SmarTrax Installation Manual

For agco rt-a series, massey ferguson 64xx/74xx/76xx series and challenger mt5x5b series

Hide thumbs Also See for SmarTrax:

Table of Contents

CHAPTER

Node Mounting Plate and Support Bracket Installed

FIGURE 1.

Machine's

Existing Screw

Node Support

Bracket

(P/N 107-0172-105)

Installed Bolt

(P/N 311-0050-105)

Mount the node mounting bracket (P/N 107-0172-128) on the bar running along the front of the cab using

two 3/4" W x 1-1/4" L x 1/4"-20 thread U-bolts (P/N 107-0172-102) and four 1/4"-20 flanged lock nuts (P/N

312-1001-168).

Remove the existing screw to the right of the machine's dash.

Position the node support bracket (P/N 107-0172-105) over the hole and re-install the machine's screw.

Secure the other end of the node support bracket to the node mounting bracket using one 1/4"-20 UNC x 1"

hex bolt (P/N 311-0050-105) and one 1/4"-20 UNC flanged lock nut (P/N 312-1001-168).

Manual No. 016-5033-006 Rev. B

C ab Component

C h a p t e r 5

Installation

Node Mounting

Bracket

(P/N 107-0172-128)

Installed U-Bolts

(P/N 107-0172-102)

and Nuts

(P/N 312-1001-168)

Table of Contents