Table of Contents
Advertisement
18
Securing the Data Harness
Multi Pro 1750 Machines
No Parts Required
Procedure
1.
Gather the excess length of the data harness
against the right, upper-frame tube
Figure 95
1. Cable tie
2. Data-harness bundle
2.
Align the data harness to the shock-support
tube, and secure the harness to the tube with
a cable tie
(Figure
3.
Align the data-harness bundle to the right,
upper-frame tube, and secure the harness
bundle to the frame tube with a cable tie
95).
4.
Ensure that there is clearance between the
pulleys and belts and the data harness, battery
harness, kit wire harness, and battery cables.
Secure the wire harness and cables with cable
ties as needed to provide clearance away from
the belts and pulleys.
(Figure
3. Shock-support tube
4. Right, upper-frame tube
95).
(Figure
19
Installing the Right Front
Fender
Multi Pro 1750 Machines
No Parts Required
Procedure
95).
Note:
Replace damaged the push-in fasteners with
Toro Part No. 117-2382.
1.
Align the inner-fender shroud to the right, upper
and right, lower-frame tubes
g202768
1. Washer (9/16 x 1/2 inch)
2. Push-in fastener
37
(Figure
96).
Figure 96
3. Inner-fender shroud
g323169
g323162
Advertisement
Table of Contents
