Toro GeoLink CL-55 Installation Instructions Manual page 35

B. Battery-cable terminal (positive)—to the
alternator (50 A)
C. Ring terminal—258 cm (101-1/2 inch)
navigation-data and electrical harness
branch (labeled
D. Ring terminal—21.6 cm (8-1/2 inch)
machine harness branch (labeled
BATTERY POSITIVE
E. Ring terminal—24 cm (9-1/2 inch) kit
sprayer-harness branch (unlabeled)
F. Battery-cable terminal (positive)—to the
engine starter
Figure 92
1. Washer 1/4 inch
(quick-connect clamp)
2. Hex nut 1/4 inch
(quick-connect clamp)
3. Battery-cable terminal
(positive)—to the engine
starter
4. Ring terminal—24
cm (9-1/2 inch) kit
sprayer-harness branch
(unlabeled)
5. Ring terminal—21.6 cm
(8-1/2 inch) machine
harness branch (labeled
)
TO BATTERY POSITIVE
2. Assemble the hex nut (1/4 inch) and washer (1/4
inch) onto the threaded post, and torque the nut
to 1017 to 1234 N∙cm (90 to 110 in-lb).
(+))
BATTERY
TO
)
6. Ring terminal—258
cm (101-1/2 inch)
navigation-data and
electrical harness branch
(not labeled—red wire
insulation)
7. Threaded
post—quick-connect
clamp (positive battery
post)
8. Battery-cable terminal
(positive)—to the
alternator (50 A)
9. Ring terminal—165 cm
(65 inch) modem power
harness branch (labeled
)
BATTERY
3. Align the insulator cover of the positive battery
cable to the starter over the threaded post
(Figure 92).
4. Assemble the following wire and cable terminals
onto the threaded post of the negative battery
terminal (Figure
Important:
terminal (negative) to the engine and chassis
ground is positioned at the top of the stack
of terminals on the threaded post.
A. Ring terminal—258 cm (101-1/2 inch)
navigation-data and electrical harness
branch (not labeled—black wire insulation)
B. Ring terminal—165 cm (65 inch) modem
power harness branch (labeled
C. Battery-cable terminal (negative)—to the
engine and chassis ground
g315993
1. Battery-cable terminal
(negative)—to the engine
and chassis ground
2. Hex nut (1/4
inch—quick-connect
clamp)
3. Washer (1/4
inch—quick-connect
clamp)
35
93) in the following order:
Ensure that the battery-cable
Figure 93
4. Ring terminal—165 cm
(65 inch) modem power
harness branch (labeled
)
GROUND
5. Threaded
post—quick-connect
clamp (negative battery
post)
6. Ring terminal—258
cm (101-1/2 inch)
navigation-data and
electrical harness branch
(not labeled—black wire
insulation)
)
GROUND
g315992