Data - Toro GeoLink CL-55 Installation Instructions Manual

Exporting Data
Note:
Do not use the USB drive from the CL-55
modem kit for exporting sprayer display data. Use the
USB storage device that you use to backup GeoLink.
1. Remove the cap from the USB port of the
sprayer-display (Figure
X30 sprayer display shown; X 25 sprayer display is similar
1. Cap (USB port)
2. Plug the USB storage device that you use to
backup GeoLink into the USB port.
3. Press the I
NVENTORY
1. I M icon
NVENTORY ANAGER
4. At the bottom of the screen, press the E
D icon (Figure
ATA
5. In the Export to USB dialog box, press the A
I I
NVENTORY TEMS
2).
Figure 2
M icon (Figure
ANAGER
Figure 3
2. E D icon
XPORT ATA
3).
icon (Figure 4).
1. A I
LL NVENTORY
6. When the sprayer-display completes the
exporting, press the return to home page icon
and the press the E
g323252
the screen.
7. Remove the USB storage device from the USB
port.
4
3).
Removing the X30 Sprayer
Display
Multi Pro 5800 Machines without
the X25 Sprayer Display
No Parts Required
Procedure
1. Remove the 26-socket connector of the data
harness from the 26-pin connector of the sprayer
display
g323309
XPORT
LL
5
Figure 4
I icon
TEMS
icon at the bottom of
JECT
(Figure 5).
g323308