Table of Contents
Advertisement
12
Installing the Modem
Antenna to the Machine
Parts needed for this procedure:
Modem antenna—GeoLink precision spray system kit
1
(Model 41633 or Model 41634)
Cable ties—GeoLink precision spray system kit
7
(Model 41633 or Model 41634)
Installing the Modem Antenna to
the Navigation Receiver Mount
1.
Clean any grease of oil from the surface of the
modem-antenna bracket.
2.
Remove the backing from the double sided
adhesive liner at the bottom of the modem
antenna
(Figure
Figure 50
3.
Adhere the modem antenna to the top of the
modem-antenna bracket as shown in
4.
Secure the antenna bracket with 3 cable ties as
shown in
Figure
50).
Figure
51.
1. Modem antenna
5.
Secure the wire harness of the modem antenna
to the bracket as shown in
Routing the Modem-Antenna
Harness
1.
Route the modem-antenna harness along the
roll bar as shown in
g309764
1. Cable ties
50.
20
Figure 51
2. Cable ties
Figure
Figure 52
or
Figure 52
Multi Pro 1750 Machines
g309766
51.
Figure
53.
g323030
Advertisement
Table of Contents
