Toro GeoLink CL-55 Installation Instructions Manual page 29

install an additional options-fuse block; refer to
your authorized Toro distributor.
Figure 76
1. Socket connector (options
power—fuse block)
2. Near the fuse block bundle the modem
power-harness at the 9-pin connector labeled
232 and secure the harness with 2 cable ties
RS
as shown in Figure
Figure 77
1. Modem power-harness
bundle (at 9-pin connector
labeled 232)
RS
2. Cable ties
3. Bundle the modem power-harness at the
negative battery cable, and secure the bundle
to the battery cable with a cable tie as shown
in Figure 77.
2. Terminal (labeled
SWITCHED—modem
power harness)
77.
3. Modem power-harness
bundle (at negative battery
cable)
4. Insert the fuse (10 A) into the fuse-block socket
(Figure 78) for the options power circuit that you
used in step 1.
g323032
1. Fuse block
Connecting the Wire Harness to
the Fuse Block
Multi Pro 5800 Machines
1. Plug the terminal of the modem power harness
labeled
SWITCHED
options power of the fuse block
Note:
If the fuse block of your machine does
not have an available options-power circuit,
install an additional options-fuse block; refer to
your authorized Toro distributor.
g315843
1. Terminal (labeled
—modem power
BATTERY
harness)
2. Insert the fuse (10 A) into the fuse-block socket
(Figure 80) for the options power circuit that you
used in step 1.
29
Figure 78
2. Fuse (10 A)
into the socket connector for
(Figure
Figure 79
2. Socket connector (options
power—fuse block)
g323085
79).
g301670