Toro GeoLink CL-55 Installation Instructions Manual page 19

Assembling the Modem-Antenna
Bracket to the Receiver Mount
1. Remove the 3 capscrews (5 x 16 mm) and 3
washers (5 mm) that secure the navigation
receiver to the receiver mount
Figure 47).
Figure 46
Multi Pro 1750 Machines
1. Navigation receiver
2. Receiver mount
Figure 47
Multi Pro 5800 Machines
1. Navigation receiver
2. Receiver mount
2. Align the hole and slot in the modem-antenna
bracket with the holes in the receiver mount
(Figure 48 or Figure
(Figure 46 or
3. Washer 5 mm
4. Capscrew (5 x 16 mm)
3. Washer 5 mm
4. Capscrew (5 x 16 mm)
49).
1. Navigation receiver
2. Receiver mount
3. Modem-antenna bracket
g200696
1. Navigation receiver
2. Receiver mount
g030750
3. Modem-antenna bracket
3. Align the 3 threaded in the base of the navigation
receiver to the 3 holes in the receiver mount
(Figure 48
4. Assemble the navigation receiver and antenna
bracket to the mount
with the 3 capscrews (5 x 16 mm) and 3 washers
(5 mm).
5. Torque the 3 bolts to 576 to 712 N∙cm (51 to 63
in-lb).
19
Figure 48
Multi Pro 1750 Machines
4. Washer 5 mm
5. Capscrew (5 x 16 mm)
Figure 49
Multi Pro 5800 Machines
4. Washer 5 mm
5. Capscrew (5 x 16 mm)
or Figure 49).
(Figure 48
g314474
g309699
or Figure 49)