1. Cable tie
2. Modem-data harness
4.
Secure the modem-data harness to the
navigation-data and electrical harness with a
cable tie as shown in
14
Removing the Terminating
Resistor
No Parts Required
Procedure
At the front of the machine, remove the terminating
resistor from the 6-socket connector of the data cable
as shown in
Figure 67
Note:
You no longer need the terminating resistor.
Figure 66
3. Monitor tube
4. Navigation-data and
electrical harness
Figure
66.
or
Figure
68.
g315768
1. 6-socket connector of the
GeoLink data cable
1. 6-socket connector of the
GeoLink data cable
25
Figure 67
Multi Pro 1750 Machines
2. Terminating resistor
Figure 68
Multi Pro 5800 Machines
2. Terminating resistor
g314709
g314497