Table of Contents
Advertisement
Figure 84
1. Push-in fastener (machine
wire harness)
2.
Remove the capscrew (1/4 x 3/4 inch) and
flange locknut (1/4 inch) from the flange of the
machine frame as shown in
Note:
Retain the capscrew and locknut for
installing the modem bracket.
Figure 85
1. Capscrew (1/4 x 3/4 inch)
2. Flange (machine frame)
3. Right seat-pivot bracket
3.
Remove the push-in fastener that secures the
wire harness of the flange of the machine frame
(Figure
85).
4.
Assemble the modem bracket to the CL-55
modem with 2 slotted machine screws (#10-24 x
1-1/2 inches), 2 spacers (1/4 x 3/4 inch), and 2
locknuts (#10-24) as shown in
g315555
2. Prop-rod bracket
Figure
85.
g315461
4. Flange locknut (1/4 inch)
5. Push-in fastener (machine
wire harness)
Figure
86.
1. Slotted machine screw
(#10-24 x 1-1/2 inches)
2. Modem bracket
3. Spacer (1/4 x 3/4 inch)
5.
Align the modem bracket under the prop-rod
bracket and behind the flange of the machine
frame as shown in
1. Prop-rod bracket
2. Push-in fastener (machine
wire harness)
3. Capscrew (1/4 x 3/4 inch)
6.
Insert the lower push-in fastener of the wire
harness into the hole in the modem bracket as
shown in
Figure
7.
Insert the upper push-in fastener of the wire
harness into the holes in the modem bracket
and prop-rod bracket
32
Figure 86
4. CL-55 modem
5. Locknut (#10-24)
Figure
87.
Figure 87
4. Flange locknut (1/4 inch)
5. Modem bracket
6. Flange (machine frame)
87.
(Figure
88).
g315553
g315552
Advertisement
Table of Contents
