Table of Contents
Advertisement
1. Coaxial connector (labeled
W
—modem-antenna
IFI
harness)
2. Blue coaxial push-in
connector (labeled
GNSS––modem-antenna
harness)
2.
Plug the blue coaxial push-in connector of the
modem-antenna harness labeled GNSS into the
connector of the CL-55 modem marked GPS,
until the connectors latch securely
3.
Plug the violet coaxial push-in connector of the
modem-antenna harness labeled LTE-1 into the
connector of the CL-55 modem marked 3G / 4G,
until the connectors latch securely
4.
Plug the red coaxial push-in connector of the
modem-antenna harness labeled LTE-2 into the
connector of the CL-55 modem marked 4G D
until the connectors latch securely
Connecting the Modem Data and
Power Harnesses to the Modem
1.
Plug the 4-pin connector of the modem data
harness labeled
4-socket connector (unmarked) of the CL-55
modem, and tighten the knurled nut of the 4-pin
connector
(Figure
Figure 82
3. Violet coaxial push-in
connector (labeled
LTE-1—modem-antenna
harness)
4. Red coaxial push-in
connector (labeled
LTE-2—modem-antenna
harness)
(Figure
(Figure
(Figure
CL55 into the
ETHERNET
83).
g310538
1. 4-pin connector (labeled
ETHERNET
data harness)
2. 4-socket connector
82).
(unmarked—CL-55
modem)
2.
Plug the 18-socket connector of the modem
82).
power harness labeled CL55 into the 18-pin
connector of the CL-55 modem
,
IV
Installing the Modem to the
82).
Machine
Multi Pro 1750 Machines
1.
Remove the push-in fastener that secures the
wire harness of the machine to the prop-rod
bracket
31
Figure 83
3. 18-socket connector
CL55—modem
(labeled CL55—modem
power harness)
4. 18-pin connector (CL-55
modem)
(Figure
84).
g310539
(Figure
83).
Advertisement
Table of Contents
