Toro GeoLink CL-55 Installation Instructions Manual page 13

WARNING
Battery terminals or metal tools could
short against metal components causing
sparks. Sparks can cause the battery
gasses to explode, resulting in personal
injury.
• When removing or installing the
battery, do not allow the battery
terminals to touch any metal parts of
the machine.
• Do not allow metal tools to short
between the battery terminals and
metal parts of the machine.
5. Slide back the insulator cover and remove the
bolt and nut that secures the terminal of the
positive-battery cable to the positive post of the
battery. (Figure 28).
Note:
Ensure that the terminals of the battery
cables do not touch the battery posts.
Figure 28
1. Nut
2. Battery post
g024082
3. Terminal (positive-battery
cable)
4. Bolt
Disconnecting the Battery
Multi Pro 5800 Machines
WARNING
Electrical sparks can cause the battery gasses
to explode, resulting in personal injury.
Incorrect battery cable routing could damage
the sprayer and cables, causing sparks.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
Battery terminals or metal tools could short
against metal sprayer components, causing
sparks.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the sprayer.
• Do not allow metal tools to short between
the battery terminals and metal parts of
the sprayer.
• Always keep the battery strap in place to
protect and secure the battery.
1. Remove the battery cover
1. Battery cover
2. Strap
2. Disconnect the negative (black—ground) cable
from the battery post
13
(Figure 29).
Figure 29
3. Buckle
(Figure 30).
g014029