Table of Contents
Advertisement
Figure 53
Multi Pro 5800 Machines
1. Cable ties
2.
Secure the modem-antenna harness to the roll
bar with 5 cable ties as shown in
Figure
53.
13
Assembling the Modem
Data Harness to the
Machine
Parts needed for this procedure:
Modem data harness—300 cm (118 inches)—GeoLink
1
precision spray system kit (Model 41633 or Model
41634)
Cable ties—GeoLink precision spray system kit
8
(Model 41633 or Model 41634)
Connecting the Modem Data
Harness to the Sprayer Display
1.
Align the modem data harness with the RS-232
connector labeled
monitor
(Figure 54
Figure 52
-
toward the sprayer
X
CONSOLE
or
Figure
55).
g323031
or
1. RJ45 connector (labeled
-
—modem data
X
CONSOLE
harness)
1. RJ45 connector (labeled
-
—modem data
X
CONSOLE
harness)
2.
At the front of the sprayer display, remove the
cap from the RJ45 port
21
Figure 54
Multi Pro 1750 Machines
2. 4-pin connector (labeled
ETHERNET CL
data harness)
Figure 55
Multi Pro 5800 Machines
2. 4-pin connector (labeled
ETHERNET CL
data harness)
(Figure
56).
g315237
-55—modem
g310205
-55—modem
Advertisement
Table of Contents
