Figure 36
1. Capscrew (5/16 x 1 inch)
2. Washer (5/16 inch)
2.
Remove the capscrew (5/16 x 1 inch) and
washer (5/16 inch) that secures the right, front
fender to the platform floor
g323170
g323167
3. Console cover (bottom)
4. Console cover (end)
(Figure
37).
1. Capscrew (5/16 x 1 inch)
2. Washer (5/16 inch)
3.
Carefully remove the 2 push-in fasteners that
secure the right, front fender to the roll bar
mounting channel
1. Push-in fastener
16
Figure 37
3. Platform floor
4. Right, front fender
(Figure
38).
Figure 38
2. Right, front fender
g323165
g323169
g323166