Table of Contents
Advertisement
Figure 74
1. Machine wire harness
g301675
g301795
2. Modem power harness
Routing the Harness to the Battery
Multi Pro 5800 Machines
1.
Route the ring terminals of the harness labeled
and
BATTERY
GROUND
seat support
(Figure
1. Modem power harness
2.
Route the ring terminals under the left frame
tube and across the top of the battery
75).
Note:
You will assemble the ring terminals
to the battery cables in
Rear GeoLink Harness, Navigation-Data and
Electrical Harness, and Modem Power Harness
to the Battery Cables (page
Connecting the Wire Harness to
the Fuse Block
Multi Pro 1750 Machines
1.
At the front of the machine, plug the terminal of
the modem power harness labeled
into the socket connector for options power of
the fuse block
Note:
If the fuse block of your machine does
not have an available options-power circuit,
28
rearward, and over the
75).
Figure 75
2. Ring terminals
(labeled
BATTERY
—modem power
GROUND
harness
Assembling the
36).
SWITCHED
(Figure
76).
g315080
and
(Figure
Advertisement
Table of Contents
