Gas Supply Air Inlet; Low-Pressure Oxygen - ResMed Elisee 150 Clinical Manual

3.2 Gas supply
Air inlet
Position the Elisée 150 so that air flow is not impeded.
Note: Do not block the air vents.

Low-pressure oxygen

1. Press on the side of the low-pressure O
2. Connect the oxygen tube.
Figure 3.5: Rear view with low-pressure oxygen connection.
Oxygen can be delivered via:
•
An oxygen bottle fitted with a pressure regulator and a rotameter;
•
An O
The O
watching the FiO
Note: Connect oxygen only when ventilation has commenced, and disconnect oxygen before
stopping ventilation.
26/174
2
1
concentrator, or wall-mounted O
2
supply is regulated using a concentrator or a rotameter. The user can monitor changes by
2
reading on the measurements screen.
2
port connection to insert the metal connector.
2
fitted with a rotameter.
2
NOT013189-6