Screen Brightness/Digital Sound Volume; Accessing The Setting Screen; Setting - ResMed Elisee 150 Clinical Manual

6.6 Screen brightness/Digital sound volume

Accessing the setting screen

The brightness and orientation of the screen can be adjusted. You can also activate the emission
of a beep each time the touch screen is pressed, and adjust the volume of the digital sound.
To access this screen, press and hold the Alarm Silence button for at least three seconds.
Note: If the Elisée 150 is delivering ventilation, you do not need to stop ventilation to adjust the
brightness and volume.

Setting

Press the scales to obtain the desired values for brightness and volume.
cm
0
H2O
90
80
70
60
50
40
30
20
10
0
Figure 6.9: "Contrast and brightness in patient mode" screen.
When the automatic screen brightness setting is selected (AUTO icon) the Elisée 150 will adjust
screen brightness depending on the brightness of the room. The screen will dim automatically
after two minutes if no alarms are triggered, the Alarm Silence button is not pressed, the On/Off
button is not pressed and the screen is not touched.
Note: The screen brightness is reduced to its lowest level as soon as the internal battery low
alarm is triggered.
On the screen brightness and digital sound volume adjustment screen you can also:
•
Invert the screen orientation (top - bottom);
•
Activate / Deactivate the emission of a beep each time a icon is pressed on the touch screen.
Note: The picture on each icon shows the action associated with it, but provides no information
on current settings.
•
Press
•
Press
•
Press
108/174
HP
to activate the touch screen beeps.
to deactivate the touch screen beeps.
to invert the screen orientation.
Back Back
Screen orientation modified
Turning on or off the touch
screen beeps
Screen brightness adjustment
Digital sound adjustment
NOT013189-6