ResMed Elisee 150 Clinical Manual page 64

As soon as the clinical mode is accessed, the program selection screen appears.
TEST TEST
Figure 5.2: Main clinical mode screen.
From this screen you can:
•
Perform a manual test to adjust the sensors and ascertain the patient circuit type;
•
Modify the P1 program (or the P2 program if the P2 activation option is set to
activation" on page 92);
•
Program the device for a new patient.
Caution
!
If you exit the clinical screens while ventilation is in progress without stopping ventilation,
the graphs screen will appear if you later return to the clinical screens.
64/174
Last test the 18/06/07
Double circuit : PASS
ACV ACV
P1: P1: P1: P1:
PS PS
P2: P2:
NEW NEW
PATIENT PATIENT
– see "P2
YES
NOT013189-6