ResMed Elisee 150 Clinical Manual page 12

Servicing and maintenance
•
The manufacturer accepts no liability for damage to the device caused by maintenance or
modifications which do not comply with the instructions provided and which do not have the
manufacturer's prior approval, or which have been carried out by unauthorised persons.
•
There is a technical manual for the ventilator, which is issued at ResMed training sessions. It
must be read and understood by the technicians responsible for servicing the ventilator.
•
If anything unexpected occurs,contact your ResMed representative.
•
To avoid the risk of electrocution, do not open the shell. All procedures should be carried out
by a technician trained in the maintenance of the ventilator.
•
Do not obstruct the vents.
•
Before using the device for the first time, and also between patients, the accessories should
be cleaned and disinfected.
•
Replacement fuses must be identical to the old ones, and comply with the same standards.
Replacement must be carried out by a qualified technician.
Power supply
•
If there is interference on the electrical network, operate the ventilator on battery power.
•
The electricity source used for the ventilator must comply with the current standards.
•
Use the specific power cord supplied with the ventilator.
Electromagnetic compatibility
•
The user must ensure that the operation of the ventilator is not impaired by the concurrent
use of devices such as defibrillators or diathermy, electrosurgery or radiology equipment or
mobile phones.
•
The device may be affected by electromagnetic fields greater than 10V/m.
Transport and storage
•
This device is not protected against water penetration (IPX0). During transportation we
recommend using the device in its bag, to provide maximum protection against accidental
splashes.
•
The ventilator must not be exposed to direct sunlight.
•
The ventilator must not be subjected to any violent impact.
•
The ventilator must not be turned on immediately after storage or transport in conditions
different from the recommended operating conditions.
Recycling
•
In accordance with directive 2002/96/EC concerning waste electrical and electronic
equipment, this device must be disposed of separately from other types of rubbish. It must
not be disposed of with ordinary municipal waste. To dispose of this device, use the
appropriate waste collection, reuse and recycling system available in your region.
12/174 NOT013189-6