Installation; Power Supplies; Mains Power Pack - ResMed Elisee 150 Clinical Manual

3 Installation

3.1 Power supplies

Mains power pack

Connections
Figure 3.1: Connecting the mains power cord to the mains power pack in its compartment.
NOT013189-6
1. Insert the two lugs on the mains power pack into
their slots.
2. Push firmly on the mains power pack until the clip
locks into place.
3. Connect the mains power cord to the power port
on the side of the pack.
4. Push down the fastening clip to prevent accidental
disconnection of the cord.
Installation 23/174