Starting And Stopping Ventilation In Patient Mode; Starting Ventilation In Patient Mode; Stopping Ventilation In Patient Mode - ResMed Elisee 150 Clinical Manual

6.3 Starting and stopping ventilation in patient mode

Starting ventilation in patient mode

To start ventilation, select the desired pre-programmed ventilation option, then press "S
V ".
ENTIL
Note: As a safety measure, the icon must be pressed for at least 1 second to start ventilation.
P1: P1:
P2: P2:
Figure 6.4: "Starting ventilation in patient mode" screen.

Stopping ventilation in patient mode

To stop ventilation, press the On/Off button on the side of the device and follow the instructions
on the screen.
Figure 6.5: Stopping ventilation.
NOT013189-6
Monday 18 18 June
Monday June
9:58:46 9:58:46
ACV ACV
PS PS
Intern. In tern.
START START
VENTIL VENTIL
1s 1s
TART
Press this icon to start the
selected ventilation program
Patient use 105/174