ResMed Elisee 150 Clinical Manual page 33

Remote control
Figure 3.14: Connecting a remote control.
A remote control is available for the Elisée 150 which can be used to start and stop ventilation
and to silence audible alarms (those that can be permanently or temporarily turned off).
The remote control connects to the serial port connection socket.
•
From the standby screen (device turned off, mains power connected), you can access the
main patient screen by pressing the remote control button for two seconds.
•
To start ventilation, press the button for two seconds.
•
To stop ventilation, press the button for six seconds.
•
To turn off an audible alarm (if it is one that can be permanently or temporarily turned off),
press the button when the alarm is triggered.
Note: The remote control will stop the audible alarm only, not the visual alarm.
NOT013189-6
Installation 33/174