ResMed Elisee 150 Clinical Manual page 96

Setting
0 cm
H2O
90
80
70
60
50
40
HP
30
20
10
0
Figure 5.51: Digital sound adjustment screen.
Press the scales to obtain the desired values for brightness and volume.
If automatic screen brightness adjustment is selected (using the AUTO icon) the Elisée 150
automatically adjusts the screen brightness according to the ambient lighting. It also turns it off
automatically if 2 minutes go by without any alarm being triggered and without you pressing the
Alarm Silence button, the On/Off button or any touch screen buttons.
On the screen brightness and digital sound volume adjustment screen you can also:
•
Invert the orientation of the screen in relation to the Elisée;
•
Activate or deactivate a beep sound each time a icon is pressed on the touch screen.
Caution
!
The picture on each icon shows the action associated with it, but provides no information
on current settings.
•
The
•
The
•
The
Note: Once the patient configuration has been set, you can access this screen directly from any
screen by pressing the Alarm Silence button
The screen brightness is reduced to its lowest level as soon as the Internal Battery Low alarm is
triggered.
96/174
ACV ACV
icon allows you to activate a beep sound;
icon allows you to deactivate the beep sound;
icon allows you to invert the orientation of the screen.
Back Back
info
for at least three seconds.
Screen orientation modified
Turning on or off the touch
screen beeps
Screen brightness adjustment
Digital sound adjustment
NOT013189-6