First Time Power Up
When inserting the USB in the RealPresence Collaboration Server, then powering up the server, the
modified network configurations in USB will upload to the server.
To power-up for the Collaboration Server first time using the USB Key:
1 Insert the USB Key containing the modified IP addresses in USB port on the RealPresence
Collaboration Server (RMX) 1500 front panel or the RealPresence Collaboration Server
1800/2000/4000 back panel.
2 Power the Collaboration Server ON.
RealPresence Collaboration Server 1500
Press on the ON/OFF button on the rear panel, the ON/OFF button is light.
RealPresence Collaboration Server 1800
Press on the ON/OFF button on the front panel, the ON/OFF button is light.
RealPresence Collaboration Server 2000
Switch on the ON/OFF switch on the rear panel, the FAN STATUS and PWR STATUS LEDs are
light.
RealPresence Collaboration Server 4000 with AC power supply
Switch on the ON/OFF switch on the rear panel, the FAN STATUS and PWR STATUS LEDs are
light.
Polycom, Inc.
First Entry Power-up and Configuration
53
Need help?
Do you have a question about the RealPresence RMX 1500 and is the answer not in the manual?