Polycom RealPresence RMX 1500 Getting Started Manual page 69

Fast Configuration Wizard–PRI Settings
Field
Default Num Type
Num Plan
Net Specific
Dial-out Prefix
21 Click Next.
Polycom, Inc.
Description
Select the Default Num Type from the list.
The Num Type defines how the system handles the dialing digits. For example, if you
type eight dialing digits, the Num Type defines whether this number is national or
international.
If the PRI lines are connected to the Collaboration Server via a network switch, the
selection of the Num Type is used to route the call to a specific PRI line. If you want
the network to interpret the dialing digits for routing the call, select Unknown.
Default: Unknown
Note: For E1 spans, this parameter is set by the system.
Select the type of signaling (Number Plan) from the list according to information
given by the service provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the system.
Select the appropriate service program if one is used by your service provider
(carrier).
Some service providers may have several service programs that can be used.
Default: None
Enter the prefix that the PBX requires to dial out. Leave this field blank if a dial-out
prefix is not required.
The field can contain be empty (blank) or a numeric value between 0 and 9999.
Default: Blank
First Entry Power-up and Configuration
69