Connect The Realpresence Collaboration Server (Rmx) 1500 To A Power Source - Polycom RealPresence RMX 1500 Getting Started Manual

Refer to Detail of front rack spacer assembly for RealPresence Collaboration Server (RMX)
1500/2000/4000
● Using a shelf
 Install the shelf, supplied by the rack manufacturer, in the rack.
 Mount the Collaboration Server unit on the shelf.
 Fasten the Collaboration Server unit to the rack with screws through the four holes in the
Collaboration Server front mounting brackets.
Connect the RealPresence Collaboration Server (RMX)
1500 to a Power Source
The following restrictions apply to the conductors and connectors that may be used to ground the unit when
rack mounted:
● When using bare conductors, they must be coated with an appropriate antioxidant compound before
crimp connections are made. Tinned, solder-plated or silver-plated connectors do not have to be
prepared in this manner.
● The same bolt assemblies should not secure multiple connectors.
Polycom, Inc.
for installation instructions.
Install the RealPresence Collaboration Server (RMX) 1500
30