Install The Realpresence Collaboration Server (Rmx) 1500; (Optional) Install Rtm Isdn Card On The Realpresence Collaboration Server (Rmx) 1500 - Polycom RealPresence RMX 1500 Getting Started Manual

Install the RealPresence Collaboration
Server (RMX) 1500
The following procedures have to be performed to install the RealPresence Collaboration Server (RMX)
1500 in your site:
●

(Optional) Install RTM ISDN Card on the RealPresence Collaboration Server (RMX) 1500

●
Mount the RealPresence Collaboration Server (RMX) 1500 in a Rack
●
Connect the RealPresence Collaboration Server (RMX) 1500 to a Power Source
●
Connect Cables to the RealPresence Collaboration Server (RMX) 1500
Note: Considerations for installing RealPresence Collaboration Server (RMX) 1500
To maximize conferencing performance, especially in high bit rate call environments, a 1Gb
connection is recommended for RealPresence Collaboration Server (RMX) 1500.
The equipment must be installed by a trained service person.
(Optional) Install RTM ISDN Card on the RealPresence
Collaboration Server (RMX) 1500
If the ISDN option was purchased with your RealPresence Collaboration Server (RMX) 1500, the ISDN card
is shipped separately and must be manually installed into the rear of the RealPresence Collaboration Server
(RMX) 1500. It is recommended to install the ISDN card before the RealPresence Collaboration Server
(RMX) 1500 is placed in a rack.
An RMX Software License is included with the ISDN card and must be registered as part of the Product.
For more information, see
To remove the blank cover from the rear of the RealPresence Collaboration Server (RMX)
1500:
1 Ensure that the power switch on the Collaboration Server is turned OFF (O).
2 Remove the cover or RTM ISDN 1500 card by unscrewing the captive screws that fasten the card to
the MCU.
3 Slide out the cover or RTM ISDN 1500 card.
To install the RTM ISDN 1500 card:
1 Slide in the RTM ISDN 1500 card.
Polycom, Inc.
Register Product .

Install the RealPresence Collaboration Server (RMX) 1500

28