Polycom RealPresence RMX 1500 Getting Started Manual page 67

Default IP Network Service–Security
Field
H.323 Authentication
User Name
Password
16 Click Save & Continue.
The IP Network Service is created and confirmed.
17 Click OK.
The IP Network Service cannot be saved if no Media cards are installed in the Collaboration Server.
During the initial Collaboration Server setup, if the system detects the presence of the RTM ISDN
card (or module for RealPresence Collaboration Server (RMX) 1800), the ISDN /PSTN tab is
activated.
If there is no RTM ISDN card in the Collaboration Server or if you do not want to define an ISDN/PSTN
Network service, go to Step 33.
A new ISDN/PSTN Network Service can be defined even when there is no RTM ISDN card installed
in the system (for RMX 1800 is an embedded module) by configuring in ISDN/PSTN Network
Service > New ISDN/PSTN Service.
18 In the ISDN/PSTN dialog box, configure ISDN/PSTN service.
Polycom, Inc.
Description
Click this check box to enable H.323 server authentication.
Select this check box only if the authentication is enabled on the gatekeeper, to
enable the Collaboration Server to register with the gatekeeper. If the authentication
is enabled on the gatekeeper and disabled on the Collaboration Server, calls will fail
to connect to the conferences.
Leave this check box cleared if the authentication option is disabled on the
gatekeeper.
Enter the user name the Collaboration Server will use to
authenticate itself with the gatekeeper. This name must
be defined in the gatekeeper.
Enter the password the Collaboration Server will use to
authenticate itself with the gatekeeper. This password
must be defined in the gatekeeper.
First Entry Power-up and Configuration
These fields can contain
up to 64 ASCII
characters.
67