Polycom RealPresence RMX 1500 Getting Started Manual page 70

22 In the Span Definition dialog box, define the Span.
Fast Configuration Wizard–Spans Definition
Field
Framing
Side
Line Coding
Switch Type
23 Click Next.
24 In the Phones dialog box, add phone numbers.
Polycom, Inc.
Description
Select the Framing format used by the carrier for the network interface from the list.
• For T1 spans, default is SFSF.
• For E1 spans, default is FEBE.
Select one of the following options:
• User side (default)
• Network side
• Symmetric side
Note: If the PBX is configured on the network side, then the Collaboration Server unit
must be configured as the user side, and vice versa, or both must be configured
symmetrically.
Select the PRI line coding method from the list.
• For T1 spans, default is B8ZS.
• For E1 spans, default is HDB3.
Select the brand and revision level of switch equipment installed in the service
provider's central office.
• For T1 spans, default is AT&T 4ESS.
• For E1 spans, default is EURO ISDN.
Note: For T1 configurations in Taiwan, Framing must be set to ESF and Line Coding
to B8ZS.
First Entry Power-up and Configuration
70