Polycom RealPresence RMX 1500 Getting Started Manual page 86

Entity
Entry Queue
(AVC endpoints)
Entry Queue IVR Service
Polycom, Inc.
Description
Default Display Name: DefaultEQ
Default ID: 1000
Default Profile:
• Factory_Video_Profile on RealPresence Collaboration Server
(RMX) 1500/2000/4000
• Factory_Mix_Video_Profile on RealPresence Collaboration Server (RMX)
1800 .
Using an Entry Queue enables one dial-in number to be used for all AVC-based
connections. In the Entry Queue, AVC participants are prompted for information
to enable routing to their destination conferences.
The default Entry Queue is also set to Ad Hoc conferencing which allows
participants to start new conferences without prior definition by entering a
Conference or Meeting Room ID that is not used by any ongoing conference
currently running on the MCU. It uses an Entry Queue IVR Service called Entry
Queue IVR Service.
The default Welcome Slide displayed at the participants endpoint upon
connection to the Entry Queue and lists the default Meeting Rooms. The
participant can select one of these Meeting Rooms or enter another ID to start a
new conference.
If no Transit Entry Queue is defined, DefaultEQ is the default Transit Entry
Queue. For more information of Entry Queue, refer to Entry Queues in related
Administrator's Guide.
Note: An ISDN/PSTN dial-in number is not assigned to the Entry Queue as the
number depends on the dial-in numbers range defined in the Network Service. It
must be manually assigned to enable ISDN or PSTN participant connections to
this Entry Queue. For more information, refer to Defining ISDN/PSTN in the
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator's
Guide.
Includes all the voice messages and video slides used to guide AVC participants
though their connection process to the MCU and route them to their destination
conference.
Entry Queue IVR Service is the default Entry Queue IVR Service provided for the
default Entry Queue.
Start Conferences Using Default Profiles
86