Unpack Realpresence Collaboration Server (Rmx) 1500/1800/2000/4000 - Polycom RealPresence RMX 1500 Getting Started Manual

Unpack RealPresence Collaboration Server (RMX)
1500/1800/2000/4000
Perform the following procedures when unpacking the RealPresence Collaboration Server (RMX)
1500/1800/2000/4000.
To unpack and lift the RealPresence Collaboration Server (RMX) 1500/1800/2000/4000:
1 When you receive the RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 packing
case, inspect the equipment for damage and verify that the components match the packing slip.
2 The RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 is shipped in a packing case
®
with Stratocell
top Stratocell and contain installation accessory kit, Telescopic rail runners accessory kit, and
optional ISDN card package.
Unpack RealPresence Collaboration Server (RMX) 4000
3 Write down the RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 serial number that
is on a sticker on the back of the unit. It will be needed for product registration later.
4 Holding the handle on each side, lift the RealPresence Collaboration Server (RMX)
1500/1800/2000/4000 from the box, and place it on a flat surface or in a rack. Remove and
packaging materials prior to positioning the RealPresence Collaboration Server (RMX)
1500/1800/2000/4000.
Polycom, Inc.
packaging, and the top cover must be unlocked and lifted. Boxes are placed on the
Prepare for Installation
21