Polycom RealPresence RMX 1500 Getting Started Manual page 44

Install chassis runners and the RealPresence Collaboration Server (RMX) 4000 in a rack
 Fasten the Collaboration Server to the rack spacers using the flat head screw
flat washer
brackets.
Rack mounting screws must be supplied by the rack manufacturer.
.
The airflow of the RealPresence Collaboration Server (RMX) 4000 is from right to left. Be sure that
the areas on the left and right side of the system are clear for proper ventilation.
Warning: Ground connection
When the unit is installed on a rack, the rack must be properly grounded to the central office ground.
The rack must be grounded with two-hole compression-type connectors using copper conductors
(tinned or untinned). Wire, bus bar or braided strap connectors are acceptable.
Polycom, Inc.
(item 9) through the eight holes in the Collaboration Server front mounting
Install the RealPresence Collaboration Server (RMX) 4000
(item 8) with
44