Polycom RealPresence RMX 1500 Getting Started Manual page 72

29 Click Save & Continue.
After clicking Save & Continue, you cannot use the Back button to return to previous configuration
dialog boxes.
The ISDN/PSTN Network Service is created and is added to the ISDN/PSTN Network Services list.
If the system cannot create the ISDN/PSTN Network Service, an error message is displayed
indicating the cause and allowing you access the appropriate dialog box in the Fast Configuration
Wizard for corrective action.
30 Click OK to continue the configuration.
31 The Spans dialog box opens displaying the following read-only fields:
 ID–the connector on the RTM ISDN card (PRI1 to PRI12).
 Slot–the MPMx/MPMRx card that the RTM ISDN / RTM ISDN 1500 card is connected to
RealPresence Collaboration Server (RMX) 2000: MPM 1/MPM2, RealPresence Collaboration
Server (RMX) 4000: MPM1/MPM2/MPM3/MPM4.
On the RealPresence Collaboration Server (RMX) 1500, the Slot field does not appear.
 Service–the ISDN/PSTN Network Service to which the span is assigned.
 Clock Source–indicates if ISDN signaling synchronization is being supplied by the Primary or
Secondary clock source. The first span to synchronize becomes the Primary clock source.
 State–the System Alert level of the span (Major, Minor). If there are no span related alerts, this
column contains no entries.
Polycom, Inc.
First Entry Power-up and Configuration
72