Polycom RealPresence RMX 1500 Getting Started Manual page 26

 On the RealPresence Collaboration Server (RMX) 1500 the center hole on the Rack Spacer must
be left clear as it is required for fixing the Collaboration Server to the rack post.
 On the RealPresence Collaboration Server (RMX) 2000/4000 the top hole on the Rack Spacer
must be left clear as it is required for fixing the Collaboration Server to the rack post.
3 Adjust the telescopic rack rail runner to the rack opening and mount it onto the marked position of
the rear post as described in step 2.
Detail of rear rack spacer assembly for RealPresence Collaboration Server (RMX) 1500/2000/4000
4 Repeat steps 2 and 3 for the right rack rail runner.
5 Install the flat head screw (5), flat washer (6) and nut spring (7) in the middle of the telescopic rack
rail runner for added stability .
The number of screws to install depends on the rack width.
Polycom, Inc.
Prepare for Installation
26