Start Conferences Using Default Profiles - Polycom RealPresence RMX 1500 Getting Started Manual

Start Conferences Using Default Profiles

In the RealPresence CloudAxis Solution, the conferencing parameters are defined in the RealPresence
CloudAxis suite using its RealPresence Virtualization Manager (DMA) component.
Your RealPresence Collaboration Server(RMX) 1500/1800/2000/4000 is shipped with default conference
profiles allowing you to immediately start conferences.
Predefined conference profiles are:
● Factory_Video_Profile—Immediately start standard ongoing AVC CP only conferences.
● Factory_SVC_Video_Profile—Immediately start standard ongoing SVC Only conferences
● Factory_Mix_Video_Profile—Immediately start a standard ongoing mixed AVC CP and SVC
conference.
For how these profiles are applied to different conferencing entities as the default conferences, see
Conferencing Settings
Note: More options available to set up and dial in to a conference
You can set up a conference in many ways, such as using your own profiles, meeting rooms, entry
queues, and reservations. The dialing strings vary per the conferencing methods, conferencing
network, and participant end point types.
For more information, refer to your system's Administrator's Guide.
To start a New Conference using a default profile:
1 In the Conferences pane, click New Conference ( ).
The New Conference–General dialog box opens.
RealPresence Collaboration Server (RMX)1500/1800/2000/4000 New Conference
Polycom, Inc.
.
Start Conferences Using Default Profiles
Default
79