First-Time Power-Up; Realpresence Collaboration Server (Rmx) 1800 Front Panel - Polycom RealPresence RMX 1800 Hardware Manual

Collaboration server

Hide thumbs Also See for RealPresence RMX 1800:

Table of Contents

First-time Power-up

1 For first entry installation, you must insert the USB key containing the modified IP addresses in the

USB slot on the system's back panel.

For details on how to modify IP addresses, see First Entry Power-up and Configuration in the

RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Getting Started

2 Turn on the power by pressing on the ON/OFF button located on the front panel of the

RealPresence Collaboration Server (RMX) 1800.

Note: Polycom software licenses

You are required to register all Polycom software licenses you have purchased when retrieving the

Activation Key. For example, Encryption and Network Separation each have different Polycom software

licenses.

The parameters in the lan.cfg file are uploaded from the USB key to the system's memory and applied

during the power-up sequence, which may take up to five minutes.

When the system's configuration is completed (including the Management and IP Network Services),

and if there are no system errors, the STATUS LED on the system's front panel turns green.

3 Remove the USB key.

You can turn the system on or off, and view the system status from its front panel.

No.

Name

LAN 1 LED

Polycom, Inc.

Description

Off - No network connection

Green - Network connected

Flickering green - In use

Guide.

Table of Contents