Power Supply Convection Specifications; Power Supply Convection - GE Mark VIeS System Manual

To ensure sufficient convection, adhere to the following guidelines for distance between power supply units and other
modules.
Mounting Position
Vertical
Lateral
Warning
PDM Power Distribution Modules

Power Supply Convection Specifications

Minimum Distance Between Modules
5 cm (2.0 in)
5 mm (0.20 in), 15 mm (0.60 in) between active components

Power Supply Convection

Depending on the ambient temperature and the load of the module, the power supply
housing may become very hot.
Public Information
GEH-6855_Vol_II System Guide 405