Internal Data Transfer Error; Internal Hardware Failure; Dc Isolation Test Failure; I/O Pack Processor Failure - GE Mark VIeS System Manual

48
Description Internal data transfer error - Expected ID [ ] Read ErrCntr/ID [ ]
Possible Cause There is an I/O pack failure or software process conflict that may be cleared by a hard reset.
Solution
• Cycle power on the I/O pack.
• Replace the I/O pack.
49
Description Internal hardware failure - Status [ ]
Possible Cause An I/O pack has failed.
Solution Replace the I/O pack.
50
Description Channel [ ] DC Isolation Test Failure
Possible Cause The I/O pack failed to auto-calibrate when powered on.
Solution Replace the I/O pack.
51
Description I/O pack processor failure - Status [ ]
Possible Cause The I/O pack failed.
Solution Replace the I/O pack.
52-64
Description TVBA Analog Input [ ] Open Circuit ([ ] Volts)
Possible Cause An open circuit has been detected on the terminal board based on the sensor type.
Solution
• Check the wiring between the terminal board and the sensor.
• Check the sensor for proper operation.
• Replace the terminal board.
272 GEH-6855_Vol_II GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
Public Information