Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 49

mounting location for M12 sockets or connectors should be 4L or 4R. An additional M32 hole (optional
slot 9) is provided for the power supply connection of size 4.
Optional slot Position
1 Internal
2 Internal
3* on side
3 A/B* on side
4 * on side
5 *
6 * on side
7 *
8 *
9* on side
* R and L (right and left side)
Pos : 95 /Allgemein/Allgemeing ültige M odul e/---------Seitenumbruc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
BU 0200 en-US-3118
Meaning
Mounting location for customer
units SK CU4-...
Mounting location for
internal braking resistor SK
BRI4-...
Mounting location for
• external braking resistor SK
BRE4-...
• external technology modules
SK TU4-...
• control options
• power connector
Cable gland
Cable gland
Cable gland
Cable gland
2 Mounting and installation
Size 1 - Size 4
3
M25 M25 Not available if slot 3 is
occupied or SK TU4-... is
mounted.
M16 M16 Not available if SK TU4-...
is mounted.
M12 M16 Not available if slot 3 is
occupied by SK BRE4 or
SK TU4-... is mounted.
-- M32 Preferably used for power
cable
Comments
49