Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 210

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 567 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P708 – Zustand Digital eing äng e [SK 2xxE] @ 2\mod_1346932204549_14638.doc x @ 43484 @ @ 1
State of digital input
P708
(digital input status)
00000 ... 11111 Displays the status of the digital inputs in binary/hexadecimal code. This display can be used to
(bin)
check the input signals.
or
Bit 0 = Digital input 1
0000 ... FFFF
(hex)
Bit 1 = Digital input 2
Bit 2 = Digital input 3
Pos : 568 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P708 – Zustand Digital eing äng e_T eil 2/2 [SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 9\mod_1448441143299_14638.doc x @ 266699 @ @ 1
First SK xU4-IOE (optional)
Bit 8 = 1st IO extension: Digital input 1
Bit 9 = 1st IO extension: Digital input 2
Bit 10 = 1st IO extension: Digital input 3
Bit 11 = 1st IO extension: Digital input 4
Minimum value
Maximum value
Simple Box: The binary bits are converted to a hexadecimal value and displayed.
Parameter Box: The bits are displayed increasing from right to left (binary).
Pos : 569 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
210
Bits 15-12 Bits 11-8
0000 0000
0 0
1111 1111
F F
Bit 3 = Digital input 4
Bit 4 = PTC resistor input
Bits 5 - 7 reserved
Second SK xU4-IOE (optional)
Bit 12 = 2nd IO extension: Digital input 1
Bit 13 = 2nd IO extension: Digital input 2
Bit 14 = 2nd IO extension: Digital input 3
Bit 15 = 2nd IO extension: Digital input 4
Bits 7-4 Bits 3-0
0000 0000
0 0
1111 1111
F F
BU 0200 en-US-3118
Binary
hex
Binary
hex