Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 165

Pos : 421 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Parameter P400 – F kt. Soll wer tei ngang [SK 2x5E] @ 2\mod_1346931796285_14638.doc x @ 42355 @ @ 1
P400
[-01]
Setpoint I/P Funct
...
(input setpoint functions)
[-09]
[-01] Potentiometer 1, function of potentiometer P1 integrated into the VFD. DIP switches 4/5
0 ... 36
{ [-01] = 1 }
{ [-02] = 15 }
[-02] Potentiometer 2, same as potentiometer 1
{ [-03] = 0 }
[-03] External analog input 1, AIN1 of the first I/O extension (SK xU4-IOE)
{ [-04] = 0 }
[-04] External analog input 2, AIN2 of the first I/O extension (SK xU4-IOE)
{ [-05] = 1 }
[-05] Setpoint module
{ [-06] = 0 }
[-06] Digital input 2, can be set to pulse signal evaluation via parameter P420 [-02] =26 or 27.
{ [-07] = 1 }
{ [-08] = 0 }
[-07] Digital input 3, can be set to pulse signal evaluation via parameter P420 [-03] =26 or 27.
{ [-09] = 0 }
[-08] Ext. AI 1 2.IOE, "External analog input 1 2nd IOE", AIN1 of the second I/O extension
[-09] Ext. analog in. 2 2nd IOE, "External analog input 2 2nd IOE", AIN2 of the second I/O
The basic versions of SK 2x5E devices do not have an analog input. An analog function can only
be used by using options (array [-01]...[-05] and [-08]...[-09]) or using digital input 2 or 3 (array [-
06]...[-07]).
Pos : 422 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
BU 0200 en-US-3118
must be "off" so that the function can be affected by this parameter setting (chapter 4.3.2.2)
The pulses can then be evaluated in the VFD as an analog signal according to the function
set here.
The pulses can then be evaluated in the VFD as an analog signal according to the function
set here.
(SK xU4-IOE) (= analog input 3)
extension (SK xU4-IOE) (= analog input 4)
5 Parameter
SK 2x5E
... Setting values below
P
165