Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 172

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 433 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Parameter P400 ... P403 @ 0\mod_1327681197866_14638.doc x @ 14973 @ @ 1
P400 ... P403
P401 = 0  0 – 10V limited
Output
frequency
P105
positive
P104
z.B. 0,0 V 2,5 V
P402
Pos : 434 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Parameter P410 – Mini malfrequenz N ebens ollwerte @ 0\mod_1327681617600_14638.doc x @ 14981 @ @ 1
Min. freq. a-in 1/2
P410
(minimum frequency auxiliary setpoints)
-400.0 ... 400.0 Hz The minimum frequency that can act on the setpoint via the auxiliary setpoints.
{ 0.0 } Auxiliary setpoints are all frequencies that are additionally delivered for further functions in the
VFD:
Pos : 435 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P400- P499/Parameter P411 – Maxi malfreq uenz N ebens oll werte @ 0\mod_1327940087486_14638.doc x @ 14982 @ @ 1
Max. freq. a-in 1/2
P411
(Maximum frequency auxiliary setpoints)
-400.0 ... 400.0 Hz The maximum frequency that can act on the setpoint via the auxiliary setpoints.
{ 50.0 } Auxiliary setpoints are all frequencies that are additionally delivered for further functions in the
VFD:
Pos : 436 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
172
Setpoint
5,0 V 10,0 V
voltage
P403
PID actual frequency
Auxiliary setpoints via BUS
min. frequency above analog setpoint (potentiometer)
PID actual frequency
Auxiliary setpoints via BUS
max. frequency over analog setpoint (potentiometer)
P401 = 1  0 – 10V not limited
Output
frequency
P105
positive
P104
z.B. 0,0 V 2,5 V
P402
negative
Frequency addition
Frequency addition
Setpoint
5,0 V 10,0 V
voltage
P403
P
Frequency subtraction
Process controller
P
Frequency subtraction
Process controller
BU 0200 en-US-3118