Pos : 591 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P728 – Netzs pannung @ 0\mod_1328173378202_14638.doc x @ 15132 @ @ 1

Input voltage

P728

(input voltage)

0 ... 1000 V

Displays the actual line voltage at the VFD input. This is determined indirectly from the value of

the DC link voltage.

Pos : 592 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P728 – Netzs pannung _ Statischer Betrag bei 24 V Geräten [SK 2xxE, SK 2xxE-FD S] @ 5\mod_1397203354385_14638.doc x @ 126308 @ @ 1

In devices with a separate 24 V supply, a static value is displayed if no line voltage is present

(e.g.: with 1~ 230 V devices: P728 = 230 V). This value is used for internal initialization

purposes.

Pos : 593 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P729 – Drehmoment @ 0\mod_1328173426559_14638.doc x @ 15133 @ @ 1

Torque

P729

(Torque )

-400 ... 400 %

Displays the actual calculated torque. Basis for calculation are the motor data P201...P209.

Pos : 594 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P730 – Fel d @ 0\mod_1328173473274_14638.doc x @ 15134 @ @ 1

Field

P730

(Field)

0 ... 100 %

Displays the actual field in the motor calculated by the VFD. Basis for calculation are the motor

data P201...P209.

Pos : 595 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P731 – Aktueller Parametersatz @ 0\mod_1328173520271_14638.doc x @ 15135 @ @ 1

Parameter set

P731

(current parameter set)

0 ... 3

Shows the actual operating parameter set.

Pos : 596 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P732 – Strom Phas e U @ 0\mod_1328173601208_14638.doc x @ 15136 @ @ 1

Phase U current

P732

(U phase current)

0.0 ... 999.9 A

Displays the actual U phase current.

NOTE:

This value can deviate somewhat from the value in P719, due to the measurement procedure

used, even with symmetrical output currents.

Pos : 597 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P733 – Strom Phas e V @ 0\mod_1328173830046_14638.doc x @ 15137 @ @ 1

Phase V current

P733

(V phase current)

0.0 ... 999.9 A

Displays the actual V phase current.

NOTE:

This value can deviate somewhat from the value in P719, due to the measurement procedure

used, even with symmetrical output currents.

Pos : 598 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1

214

Information

0 = Parameter set 1