Nord Drivesystems NORDAC FLEX SK 200E Series User Manual page 216

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
Pos : 606 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P739 – Aktuelle Temperatur Kühl körper [SK 1x0E, SK 2xxE, SK 2xxE-FDS] @ 2\mod_1346932207653_14638.doc x @ 43604 @ @ 1
P739
[-01]
Heatsink temperature
...
(present heat sink temperature)
[-03]
-40 ... 150°C [-01] = Heat sink temperature VFD
[-02] = Ambient temperature VFD
[-03] = Temp. Motor KTY, motor temperature via KTY, recording exclusively via IO extension,
setting in (P400) to function {30} "Motor temperature"
Pos : 607 /Anleitungen/El ektr oni k/FU und Starter/5. Par ameter/Par ameter auflistung (P000 ...)/P700- P799/Parameter P740 – Pr ozessdaten Bus In [SK 1x0E, SK 2xxE, SK 500...535E, SK 2xxE-FD S] @ 0\mod_1328175248086_14638.doc x @ 15146 @ @ 1
P740
[-01]
PZD bus In
...
(process data Bus In)
[-19]
0000 ... FFFF (hex) This
information about the actual
control
setpoints
transferred
systems.
For display, a BUS system
must be selected in P509
Standardization:
( Section 8.9
"Standardization
setpoint/target values")
Pos : 608 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
216
parameter provides
[-01] = control word
word and the
[-02] = Set value 1 (P510/1,
that are
P546)
via the bus
[-03] = Set value 2 (P510/1, ...)
[-04] = Set value 3 (P510/1, ...)
[-05] = res. Stat. InBit P480
of
[-06] = Parameter data In 1
[-07] = Parameter data In 2
[-08] = Parameter data In 3
[-09] = Parameter data In 4
[-10] = Parameter data In 5
[-11] = Setpoint 1 (P510/2)
[-12] = Setpoint 2 (P510/2)
[-13] = Setpoint 3 (P510/2)
[-14] = control word PLC
[-15] = setvalue 1 PLC
...
[-19] = PLC 5 setpoint
S
Control word, source from
P509.
Set value data from main
setpoint (P510 [-01]).
The displayed value depicts all
Bus In Bit sources linked with
an "OR".
Data during parameter transfer:
Order label (AK), parameter
number (PNU), index (IND),
parameter value (PWE 1/2)
Setpoint data from master
function value (broadcast) -
(P502/P503) - , if P509 = 4
Control word + setpoint data of
PLC
BU 0200 en-US-3118